+31 35 711 0876 Support Center   Remote Help

HP Color Laserjet 2600n kalibreren

Vraag:
Hoe kan een HP 2600 gekalibreerd worden?
How can i calibrate an HP 2600?

Deze oplossing is alleen in het engels beschikbaar
Tags: kalibreren, calibrate, hp 2600n, 2600n, 2600
Antwoord:

Calibrating the printer
The printer automatically calibrates at various times. Adjust the calibration settings by using the HP Toolbox.
Environmental differences or aging print cartridges might cause fluctuations in image density. The printer accounts for this with image stabilization control. The printer automatically calibrates at various times to maintain the highest level of print quality. Also request a calibration by using the HP Toolbox.
The printer does not interrupt a print job to calibrate. It waits until the job is complete before calibrating or cleaning. While the printer is calibrating, it pauses printing for the time that is required to complete the calibration.
Calibrate the printer at the control panel of the printer
  1. Press the (LEFT ARROW) or (RIGHT ARROW) button until the display reads System setup and then press (SELECT).
  2. Press the (LEFT ARROW) or (RIGHT ARROW) button until the display reads Print quality and then press (SELECT).
  3. Press the (LEFT ARROW) or (RIGHT ARROW) button until the display reads Calibrate color and then press (SELECT).
  4. Press the (LEFT ARROW) or (RIGHT ARROW) button until the display reads Calibrate now and then press (SELECT).
  5. Press the (SELECT) button to confirm Calibrate now.
Calibrate the printer from the HP Toolbox
  NOTE: This procedure applies to Windows operating systems only. Macintosh users should calibrate the printer manually using the procedure above.
  1. Open the HP Toolbox in one of these ways:
    • Double-click the HP Toolbox icon on the desktop.
    • Click Start , Programs or All Programs , HP , HP Color LaserJet 2600n , and then HP Color LaserJet 2600n Toolbox from the Desktop to open the HP Toolbox.
  2. Click the Troubleshooting tab and then Troubleshooting Tools (on the left side of the screen).
  3. Click Calibrate now in the Calibration section.

Terug naar het Knowledge base overzicht